60/B SECUR Alu Slide REI 60
Fire glass sliding doors in aluminium with manual or power opening
Supply and installation of SECUR ALU REI 60 fire rated glass doors with certification of fire resistance in accordance with Italian test standard UNI 9723 , having the following characteristics:
Door frames, leaves, fixed sidelights, transoms and fixed frames, glazing beads and trim profiles, completely built with 55 x 75 / 86mm and 77,5 x 75 / 86 mm SECUR aluminium profiles with double thermal break and insertion of calcium silicate based thermal insulation, certified for heat resistance.
Total width of profiles for jambs and horizontal members = 100 mm. Sliding track 257 mm.
Assembly of profile sections by mechanical fastening with aluminium angle brackets and steel and/or aluminium U bolts.
Surfaces coated with powder paint, RAL colours, thickness 60 microns according to Qualicoat specifications or anodised to Qualanod specifications, thickness 15 microns. Dual EPDM seal for cold smoke protection on the central part of the sliding door with 2 leaves.
Dual heat-expanding seal to protect against cold smoke, applied on the perimeter of openable leaves, in the inside parts of the glazing and on the outer perimeter of the frame on the wall side and the inner perimeter on the leaf side.
Aluminium sliding track, ball bearing rollers, final damper, continuous closing regulator, spring return mechanism, retaining electromagnet. With embedded bar and/or handle.
Glazing / panel fixed centrally in relation to the profile thickness with exterior and interior glazing beads, exterior and interior EPDM seal and steel safety fasteners.
As an alternative to manual opening/closing: installation of an automatic motorized mechanism with automatic release in the event of a power failure, complete with control radar and sensors (other automatic door control systems are possible).
Glazing: transparent for indoor use, made up of glass panes with an interposed layer of transparent silicate based material, UV stable according to the specifications of standard EN 12543-4, class REI 60.
Fastening on the installation site with screws and anchors for masonry or self-tapping screws on a false metal frame. Perimeter finishing seal. Perimeter trim where requested.