Message
  • EU e-Privacy Directive

    This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.

    View Privacy Policy

30/A - MARIN security doors marine secur a 30 marin

Fire rated glass doors, windows and partitions in aluminium for naval use

Supply and installation of SECUR A-30 MARIN fire rated glass doors and fixed glass partitions with certification of fire resistance in accordance with Italian test standard IMO Res. MSC 61 (67) Annex 1 Part 3 Certification scheme RINA SC-CCE-MED-01,  having the following characteristics:

Door frames, leaves, fixed sidelights, fixed frames, glazing beads and trim profiles, completely built with 55 x 75 / 86 mm and 77,5 x 75 / 86 mm SECUR aluminium profiles with double thermal break. With insertion of calcium silicate based thermal insulation, certified for heat resistance in accordance with the specifications of IMO Res. MSC 61(67) Annex 1 Part 1 Certification scheme RINA SC-CCE-MED-01, non-combustible class A-B-C.
Total width of profiles for jambs and horizontal members = 100 mm, including glazing beads.
Assembly of profile sections by mechanical fastening with aluminium angle brackets and AISI 304 stainless steel and/or aluminium U bolts.
Surfaces coated with powder paint, RAL colours, thickness 60 microns according to Qualicoat specifications or anodised to Qualanod specifications, thickness 15 microns.
Dual EPDM seal for cold smoke protection.
Dual heat-expanding seal to protect against cold smoke, applied on the perimeter of openable leaves, in the inside parts of the glazing and on the outer perimeter of the frame on the side against the boat structure and the inner perimeter on the leaf side.
Adjustable three-wing hinges made of AISI 316 stainless steel, provided with resin bushings and AISI 316 stainless steel pins.
Overhead door closer without stop, with normal arm.
Glazing / panel fixed in a central or non-central position, depending on need, with interior glazing bead, exterior and interior seal and AISI 304 stainless steel safety fasteners.

Doors and windows: leaf flush with frame on the inside and outside.

Inward opening exterior doors:
Active leaf:  Central lock with device for controlling 2 secondary locks. With AISI 304 stainless steel locking rod embedded in the profile.
With AISI 304 stainless steel forends and striking plates.
With internal cylinder and latch made of nickel-plated brass.
Handles, rose and keyhole cover made of YALE AISI 316L stainless steel.  Other accessories, handles made of AISI 303, AISI 304 and AISI 420 stainless steel with PVD ZrN coating.
Leaf with additional central locking and AISI 316 bumper guards on hinge side.
Inactive leaf: Lock strike with device for rods. With automatically triggered locking rods embedded in the profile. Galvanized iron rods with AISI 304 stainless steel locking pins.

With AISI 304 stainless steel forends and striking plates.
AISI  316L stainless steel handles and rose. Other accessories, handles made of AISI 303, AISI 304 and AISI 420 stainless steel with PVD ZrN coating.
Leaf with additional central locking and AISI 316 bumper guards on hinge side.
With sequence closing selector incorporated in the door closer.
Variant:  Outward opening exterior doors
Active leaf: Central lock with AISI 304 stainless steel forends and striking plates. With internal cylinder and latch made of nickel-plated brass.
Handles, rose and keyhole cover made of YALE AISI 316L stainless steel. Other accessories, handles made of AISI 303, AISI 304 and AISI 420 stainless steel with PVD ZrN coating.
Inactive leaf: Lock strike with device for rods. With automatically triggered locking rods embedded in the profile. Galvanized iron rods with AISI 304 stainless steel locking pins. With AISI 304 stainless steel forends and striking plates.
With AISI  316L stainless steel handles and rose. Other accessories, handles made of AISI 303, AISI 304 and AISI 420 stainless steel with PVD ZrN coating.

Glazing: transparent or coloured, made up of glass panes with an interposed layer of transparent silicate based material, UV stable according to the specifications of standard EN 12543-4, class A-30.

Fastening on the installation site with AISI 304 stainless steel screws.
Perimeter finishing seal between door and boat structure. Perimeter trim where requested.

Doors approved and classified as follows:

Double-leaf doors with inward opening:
Air permeability air according to UNI 7979/79   class A3
Wind resistance according to UNI 7979/79       class V3
Watertightness according to UNI 7979/79         class E3

Single-leaf door with outward opening and fixed side panel:
Air permeability air according to EN 1026/00:     class 4
Wind resistance according to EN 12211/00:     class B5
Watertightness according to EN 1027/00:         class 8A